Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. | |
problemi elica |
Post Reply | Page <12 |
Author | |
Stella*Nova
Vice Admiral Joined: 25 January 2004 Location: Lelystad / NL Status: Offline Points: 776 |
Post Options
Thanks(0)
|
On my last Hanse 341 I had the same engine and the same Saildrive. The prop was also a Flex-O-Fold, but I think with other dimensions. Full speed I had app 4200 rpm and Speed max 7,5 knots.
On my recent 370 the prop dimension seems to be better.
|
|
BR Ralf, Ex. 'a mare' H370
|
|
Gregor
Admiral Joined: 11 February 2006 Location: Netherlands Status: Offline Points: 1256 |
Post Options
Thanks(0)
|
With my 311, I can make 3200rpm, 7-6.9knts, 3 blade folding prop and a Volvo Penta with 19hp.
Gregor |
|
salepepe
Sub Lieutenant Joined: 02 October 2008 Status: Offline Points: 17 |
Post Options
Thanks(0)
|
I'd just try a Variprofile two blades fitted on a 370 by Nautilus in Rome it seems to be working very weel, in going to fit it on my 400 wich is on is way from Greifswald.
|
|
PekkaL
Commander Joined: 01 January 2005 Location: Finland Status: Offline Points: 92 |
Post Options
Thanks(0)
|
I have plotted my 371/Yanmar 29hp speed / revs in calm conditions, heavy boat with a clean hull:
- 6 knots at 2500 rpm - 7 knots at 3200 rpm - 7.3 at 3600 see the graph at: http://www.pbase.com/pekkal/image/70789903.jpg Regards, pekkal S/Y Vedette |
|
Pekka Leppanen, "Vedette"
|
|
panos
Admiral Joined: 02 March 2008 Status: Offline Points: 1929 |
Post Options
Thanks(0)
|
Hi,
Beautiful pictures you have in your site Pekkal!
|
|
Panos
Hanse 630e - selling her - |
|
Gregor
Admiral Joined: 11 February 2006 Location: Netherlands Status: Offline Points: 1256 |
Post Options
Thanks(0)
|
Absolute true Panos. Nice taken.
Gregor |
|
Uisge Beatha
Currently sailing Dehler 36 JV (2002) Previous boat: Hanse 311 #80 http://www.uisge-beatha.eu |
|
MatsG
Lieutenant Joined: 02 November 2004 Location: Sweden Status: Offline Points: 36 |
Post Options
Thanks(0)
|
I have a 371 with Yanmar 39Hp. With 3 blade Flexofold 17"/11" I reach about 3400rpm full thottle, that is too high for this motor. According to Yanmar dealer I could use a Flexofold 18"/12" but with this propeller is a little bit too big and it would be just a little bit hard work for the 3JH4. I do maximum about 8 knots on the GPS.
Cruising speed I do 6.5-7.2 knots, never more than 90% of maximum rpm. I think the maximum rpm is highly depending in propeller size an workload. /MatsG Edited by MatsG - 29 September 2009 at 20:36 |
|
MatsG 371
|
|
karina
Lieutenant Joined: 18 August 2009 Status: Offline Points: 48 |
Post Options
Thanks(0)
|
Hi Sergio,
our 371 goes 7,5 kn with Volvo 2030 (29hp) and a 2 blade folded propeller at 3600 u/min (nearly no wind, small waves).
Before we had a Beneteau with Yanmar 3YM (21hp). The Yanmar is specified with 3650 U/min max. (at 10% of engine hours).
Perhaps your Yanmar has a problem. Check the max. U/min in the neutral gear position. Is the engine able to reach very quickly 3650 U/min?
If yes, it seem that your propeller has to much load for the engine (too big or too much pitch). Ask at Hanse-Yachts after sales support or Yanmar for the correct propeller data and compare.
Best regards,
Rainer
|
|
takomitak
Lieutenant Joined: 16 May 2008 Location: Italy Status: Offline Points: 34 |
Post Options
Thanks(0)
|
Ciao Sergio, io ho un 470 e durante la scorsa primavera-estate ho messo a disposizione la mia barca ad un amico che è il titolare della Max Prop per testare una nuova elica con passo variabile dinamico. In pratica si tratta di un'elica (nel mio caso a 4 pale) che, oltre al solito sistema di pale orientabili e passo regolabile, ha nel suo interno un elemento elastico in acciaio speciale che rende il passo dinamico, in paratica si modifica automaticamente in base alle condizioni del mare e del vento. Tanto per darti dei riferimenti, con la normale elica fornita da hanse la mia barca raggiungeva 7,8 kn a 2400 giri (75 cv), con la nuova elica in condizioni di mare e vento calmi, raggiunge 8 kn a 1800 giri mentre a 2400 giri sono a 9,2 (quasi oltre la velocità critica). La cosa interessante è che le pale sono sempre in movimento sul loro asse e quidi il passo si regola da solo. Se ti interessano maggiori info puoi chiamarmi 348 1342682
Ciao e buon vento
Petro
|
|
Post Reply | Page <12 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk |