Print Page | Close Window

Simrad AC12/Jefa driver installation

Printed From: myHanse.com
Category: Hints & Tips
Forum Name: 320
Forum Description: 320 Hints and Tips
URL: https://www.myhanse.com/forum_posts.asp?TID=9519
Printed Date: 28 March 2024 at 14:45
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Simrad AC12/Jefa driver installation
Posted By: Bo.Steffensen
Subject: Simrad AC12/Jefa driver installation
Date Posted: 27 March 2016 at 22:33
Hi - I’m installing the more or less standard autopilot solution in my 320 Smartline 2009, Simrad/Jefa driver. I have been told that the cabling should be factory installed. But I can't find the power wire endpoint for the AC12 computer. Seems like something is missing? Inside the electric switch panel there is a 4mm wire labeled 'Autopilot', but it is not connected. The wire is striped together with several other wires... as some kind of prepared wire installation. But there are no suitable connector? Where does this cable end?



Replies:
Posted By: Janni
Date Posted: 28 March 2016 at 17:17
Can it be that the plug has to be connected to the DC breaker panel?
Jan





-------------
Hanse 320 #548 "SCHNEGGE"


Posted By: Bo.Steffensen
Date Posted: 02 April 2016 at 10:58
Thanks for the reply, the connector is connected to the DC breaker... but the cable to the autopilot is not installed in the Smartline 2009 version


Posted By: Janni
Date Posted: 02 April 2016 at 11:11
I had my AP24 installed by Wendel and Rados in Greifswald on the H320 Smartline. 
Therefore I do not know if they made the cabling to the AC12 and to the breaker panel or if it has been existing as a standard. 
Jan


-------------
Hanse 320 #548 "SCHNEGGE"



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net