Welcome to myHanse.com the forum for Hanse Yachts owners throughout the world. | |
New Owner Query no.1 |
Post Reply |
Author | |
Pangani
Lieutenant Commander Joined: 18 January 2019 Location: James Watt Dock Status: Offline Points: 53 |
Post Options
Thanks(0)
Posted: 24 January 2019 at 11:52 |
I completed the purchase of a H320 last week and began work on a few upgrades and recommendations from the surveyor's pre-purchase report in preparation to bringing her up to the Firth of Clyde from the south coast in early spring. One of the things I forgot to measure up for my next trip down was the gas hoses (diameter 8mm or 10mm?) and regulator size as they need replaced. Any ideas? Also, I'm replacing an NMEA0183 wired chartplotter with a NMEA2000 plotter at the pedestal. The wiring in the aft lazarette has one or two Simnet cable ends - any idea where these go to? In any event, I'm planning on using a NMEA2000 to Simnet cable down the pedestal and into the lazarette and replace the 3 prong joiner there with a 7 prong joiner and connect it at that point. Great owners' forum! Implemented a number of tips from the forum including Ikea bed slats in fore and aft cabins.
|
|
Martin&Rene
Vice Admiral Joined: 06 December 2009 Location: United Kingdom Status: Offline Points: 833 |
Post Options
Thanks(0)
|
If you are coming up to Scotland, you may be interested in this approach, which I think is a better option. http://www.myhanse.com/underbed-condensation_topic9228_post76226.html?KW=PIR#76226 We had our gas fittings replaced by https://www.heatwave.org.uk/Heatwave Plumbing & Heating 25 Bankhouse Avenue Largs KA30 9PF Phone: 07773 774937 He did a very thorough job, as I did not fancy changing out all the gas fittings in the yacht.
|
|
Martin&Rene Hanse 341 Dipper Wheel steering, 3 cabin layout, normally based in Scotland
|
|
cptgood
Commadore Joined: 26 August 2016 Location: Tuscany - Italy Status: Offline Points: 409 |
Post Options
Thanks(0)
|
Hi, You can find all the gas hoses on the SVB site (the link is for the italian one)
https://www.svb-marine.it/it/gok-tubo-del-gas-filetto-g-1-4-x-raccordo-8-mm.html https://www.svb-marine.it/it/gok-tubo-del-gas-filetto-1-4-da-entrambi-i-lati.html https://www.svb-marine.it/it/tubo-del-gas-raccordo-a-compressione-8-mm-su-entrambi-i-lati.html
|
|
Hanse320 - Hull#127/08 - Wheel - ST headsail - Yanmar 3YM30 - SD20
|
|
Mr Bluesky
Commander Joined: 12 January 2016 Location: Brixham Status: Offline Points: 129 |
Post Options
Thanks(0)
|
Stuart from www.gassafemarine.co.uk works along south coast, he would be good option to service the gas system and will replace anything that is required. Top bloke very reliable.
|
|
Mr Blue Sky - 385 #359 - Sail safe sail Hanse.
|
|
Pangani
Lieutenant Commander Joined: 18 January 2019 Location: James Watt Dock Status: Offline Points: 53 |
Post Options
Thanks(0)
|
Thanks for the tips. I'm going to replace the tubes and regulator myself and will get it checked over by a professional.
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Links : www.hanseyachts.co.uk www.hanseyachts.com www.fjordboats.co.uk www.dehler.co.uk www.varianta.co.uk |