Print Page | Close Window

348 Autopilot

Printed From: myHanse.com
Category: Hints and Tips
Forum Name: 345/348
Forum Description: 345/348 Hints, Tips and News
URL: http://www.myhanse.com/forum_posts.asp?TID=10973
Printed Date: 12 July 2020 at 00:37
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: 348 Autopilot
Posted By: Brickbat
Subject: 348 Autopilot
Date Posted: 18 August 2018 at 22:25
My 348 has B&G Zeus chartplotter and Triton 2 instruments with autopilot controller. Does anyone know what is required to get the autopilot working?

Thanks.



Replies:
Posted By: S&J
Date Posted: 20 August 2018 at 08:43
This should have been dealt with by your dealer on commissioning. Did you have a handover sail when the boat was delivered?

I assume that in addition to the two Triton displays you have a dedicated Triton autopilot control?

The autopilot will need configuration in two stages. The first is done whilst tied up and the second involves turning the boat in a large circle at a specific rate of turn. The configuration process can be initiated from the Zeus.

I can point you to the appropriate section in the manual if you require.

-------------
H385 #351 Ningaloo UK south coast; Scotland 2020?


Posted By: Brickbat
Date Posted: 21 August 2018 at 19:09
Thanks S&J,

Negative on the commissioning.

Yes, I have a dedicated autopilot controller, but the Zeus will not recognize a computer in the system. I am beginning to think one was not included with the boat, which seems strange as the controller was provided. Not to mention that the autopilot was part of the purchase. At any rate, I can't find the device or any documentation, which would probably include the configuration of the system that you described.

Regards, 
   
Brickbat




Posted By: S&J
Date Posted: 22 August 2018 at 14:56
If you use the setting menu on the Zeus, then Network then Device list you should see a list of all the NMEA devices on the network.  I think you can select an item on the list to see the details and also configure.  Try looking for an autopilot there.

What happens when you actually try to engage the autopilot using the controller.


-------------
H385 #351 Ningaloo UK south coast; Scotland 2020?


Posted By: Brickbat
Date Posted: 22 August 2018 at 15:33
Hello S&J,

I found the devices is the settings and ran through them all with B&G who said the list does not include an autopilot computer.

The controller has no response.

Thanks for your ideas, but I think the computer is missing.

Regards,




Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net