Print Page | Close Window

webasto info - location, piping, etc.

Printed From: myHanse.com
Category: Hints and Tips
Forum Name: 370 / 375
Forum Description: 370 / 375 Hints, Tips and News
URL: http://www.myhanse.com/forum_posts.asp?TID=13650
Printed Date: 01 December 2022 at 16:39
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: webasto info - location, piping, etc.
Posted By: sconfu
Subject: webasto info - location, piping, etc.
Date Posted: 20 September 2022 at 20:47
We are planning to profit of our "new" boat also in winter. In the mediterranean, but still...it can get chilly. If everything goes as planned, we will be cruising in the two weeks before xmas.

I have searched both the forum and the "we sail hanse" website but could not find the info:

Where is the webasto located from the factory and where do the pipes run? And the exhaust?

I have seen a convenient hole from under the couch starboard side that goes into the front cabin (I think) but the routing that goes into the two cabins is not clear to me.

Thanks in advance for all sorts of info

Cheers,

Umberto





Replies:
Posted By: Captain Cook
Date Posted: 20 September 2022 at 21:46
Look at the pictures. One heating tube goes under the aft cabin berth to an outlet under the seat. I have put a T-piece here, and made an outlet in the shower cabin. Another tube goes past the diesel tank, behind the pantry and have outlets in the salon and forward cabin. If you use Advanced Search->Any Date->All Forums->"Webasto" - you will find a number of posts.
https://www.wesailhanse.se/Hanse370_documents/370_documents_webasto/Webasto%20500%20asennusohje%20Boot_ENG.pdf
(H8jer: Any news on the BananAlbum/Werftbesoek? My screendumps are of poor quality).






-------------
Freya H400 #27 (2006), 40HP 3JH4E, 2-cabin, 3-blade Flexofold, Aries LiftUp Windvane, Exturn 300, Jefa DD1,Simrad NX40,Icom M603(VHF)+M802(SSB)


Posted By: sconfu
Date Posted: 21 September 2022 at 12:53
Thanks, it is somewhat clearer.

I had searched the forum but could not find the exact routing of the pipes.

It's going to be a nightmare to install with all the furniture in place...Cry


Posted By: alettaenmarcel
Date Posted: 23 September 2022 at 17:03
Originally posted by sconfu sconfu wrote:

Thanks, it is somewhat clearer.

I had searched the forum but could not find the exact routing of the pipes.

It's going to be a nightmare to install with all the furniture in place...Cry
Did it with all furniture in place, no problem.
Only have i Made some inspection hadges before so I could reach everything.
Gr Marcel


-------------
Kids Dingys 72-79 ,Several Windsurfboards 79-86 OK dingy competitions 86-92 , Trotter Pandora Race 92-98, Friendship 28 Sport 98-05, Hanse 370 06-......



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net